The T00, T42, and racks can be extremely heavy when several drawers are present. The following table shows the necessary weight distribution distances for the T00, T42, and racks when loaded. The following table shows the necessary floor loading for. Learn about the supported feature codes that are available for T00, T42 and racks. Hardware specifications provide detailed information for your rack, including dimensions, electrical, power, temperature, environment, and.
|Published (Last):||14 December 2007|
|PDF File Size:||15.67 Mb|
|ePub File Size:||13.59 Mb|
|Price:||Free* [*Free Regsitration Required]|
Rack noise levels are a lbm of the number and type of drawers installed. Acoustic door Attributes required: If optional ruggedized rack feature number is installed, a tool will be required to remove the bolt to secure the side cover to the rack. If this is done, the bolts and spacers will function correctly, but the trim pieces are not designed for use with uneven rack heights.
7014-T42 IBM Rack Model T42
Power Requirements Power Consumption in active mode: Both Side Panel For 1. Indicator for rack space utilization Minimum required: Rack with FC heat exchanger rear door and standard front door. This AC power distribution unit provides twelve C13 power outlets.
As additional features are announced, supported, or withdrawn, this list will be updated. Its unique design uses standard fittings and couplings and, because there are no moving or electrical parts, helps increase reliability.
Connection between Rack Status Beacon components Attributes required: It also includes two sliding bars that mount inside the left and right rack side panels. Planning for the T00 and T42 racks. There are also three C13 receptacles on the rear of the PDU positioned toward the middle of the rack.
Use of this feature will affect the routing of the order. The door is black with sculptured accents.
FC heat exchanger rear door. Supported features cannot be ordered on the converted model, only left on or removed from 714-t42 converted model. For more information about rack power distribution units and power cord options, see Power distribution unit and power cord options for racks.
Each outlet is rated at up to 10 amp and has its own circuit breaker. Features – No charge. The customer’s input is collected and verified via the marketing configurator.
Does not apply Rack Indicator, Rack 11 When added to an initial rack order, this indicator is used to specify the eleventh rack for a multi-rack order. Indicator of rack space utilization Minimum required: See your server or hardware specifications for specific requirements.
Does not apply Rack Indicator, Rack 14 When added to an initial rack order, this indicator is used to specify the fourteenth rack for a multi-rack order. Dimensions without covers, units are mm with inches in parentheses. Hardware specifications provide detailed information for your rack, including dimensions, electrical, power, temperature, environment, and service clearances. Requested arrival dates should be adjusted accordingly, i.
Decorative trim kit Attributes required: The PDU comes with a permanently attached 4. Caster and leveler locations The following diagram provides the caster and leveler locations for the T00T42,and racks.
T00, T42, and rack weight distribution and floor loading
Redundant PDU, power supplies and line cords within the Rack. The PDU can be mounted vertically in rack side pockets or it can be mounted horizontally. Does not apply Rack Indicator, Rack 6 When added to an initial rack order, this indicator is used to specify the sixth rack for a multi-rack order. They can be moved to a position that disables the external latches on the rack side panels, and prevents removal of the side panels. Send feedback Rate this 7014t42 Last updated: The T42 rack is designed to hold up to 4 Power Distribution Units vertically mounted in the back 0714-t42 the rack, two each on the left and right sides.
T00, T42, and supported feature codes
The sliding bars are accessible when the rack rear door is open. The overall sound reduction is approximately 6 dB. Without this hardware, the unsupported end of the PDU will rest on the hardware mounted immediately below it.
Recommended minimum vertical service clearance from floor is mm 8 ft When installing a model or in a T42 rack, there are restrictions to what height the rack installation can begin so that SMP and FSP flex assemblies are accommodated.
Recommended minimum vertical service clearance from floor is mm 8 ft. The feature includes a large steel brace or truss that bolts into the rear of the rack. Feature ERG0 8-inch rear extension is not supported with Does not apply Note: The CFReport from the marketing configurator must be submitted to: The door is steel and has an extensive perforation pattern that allows ventilation and some visibility into the rack.